Pitched Rolled Roof
Power wash the surface to remove all dirt and debris and be sure it is completely dry before the coating application. Read all label instructions before beginning. Always run a test patch first in an inconspicuous area, to ensure that proper adhesion and drying occurs and the product works to your satisfaction. Be sure surfaces are clean and dry before the coating application.
Products can be applied with a paint brush, a push broom, a low nap roller with a long handle or a Commercial Airless Sprayer. For larger commercial jobs. We recommend using a commercial grade airless sprayer. Graco, Bulldog or Titan brands work well. Click Here for Specifications
Step 1: Ames Super Primer™ may be needed if the surface is deteriorated or has a hard to stick surface such as aluminum or silver roof coating. Apply Super Primer™ at the rate of 1 gallon per 200 square feet.
Step 2: Prime with two to three coats of Super Elasto-Barrier® until roof surface is smooth and sealed.
Weather & Drying Guidelines:
Products are best applied between 50° to 90° F (10° to 32° C) on warm dry surfaces. Apply when the streets are dry, the sun is in the sky and no inclement weather is forecast. Starts to dry in 2-8 hours, depending on thickness of application and weather; cures in 24 hours. Low temperatures, high humidity and evening and morning dew will require increased drying/curing time.
Clean-up, Storage, and Disposal:
Clean tools and small spills with water. Store unused product in its original container, tightly sealed and protected from freezing. Dispose of this product in accordance with local, state, or federal requirement