Fire Testing

Back

We Sell Factory Direct!

Fire Testing Results Information
Testing Medthods	Testing Method	These Formulas have been tested in accordance to: • ASTM E-108-80a • ASTM E-84-81a. Ames products will not take away from the fire classification of the surface to which it is applied.
ASTM E-108a	Weyerhaeuser Company, Fire Technology Unit. Class A Spread of Flame and Intermittent Flame Test: “No ignition or flame spread advance was noted.” “No sustained flaming for duration of test.” “No flame penetration through any of the test decks.” “Met the criteria for conditions of a classification Class A over A/C Substrate.”
ASTM E-84-81a	Weyerhaeuser Company, Fire Technology Unit. Surface Burning Characteristics and Flame Spread Classification: “Smoke attained was zero.” “The flame spread index determined meets the criteria for Class A material over A/C Substrate.”
MSDS	State Fire Marshall, Hazardous Metal Division. Volatile Organic Contents – less than 1 gram per liter.
Back

Ames® Research Laboratories, Inc., PO Box 1350 Jefferson, Oregon 97352 USA
Toll-Free: 1-888-345-0809 PST, Phone: 503-588-3330 PST, Fax: 503-364-2380,
Please be sure your spam filters are set to accept emails from amesstaff@amesresearch.com.
Email: amesstaff@amesresearch.com
www.amesresearch.com

We Sell Factory Direct
CALL TO PLACE YOUR ORDER: 1-888-345-0809
We're here 7 days a week to serve and to take your order 6:00 am - 6:00 pm PST

Prices are in U. S. dollars and subject to change without notice. Copyright ©2002-2009 Ames® Research Laboratories, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, article content, sounds, or registered trademarks of Ames® Research Laboratories, Inc. is strictly prohibited under copyright law. Site content, including photography, descriptions, pricing, promotions, and availability are subject to change without notice.