Pitched Rolled Roofs
Many old rolled roofing get cracked or need recoating to avoid any leakage. With Ames roof coating, your old rolled roofing will look as good as new. Our roof seal will close up any cracks preventing water damage in your roof. It will also help reflect sunlight making it an energy saving investment. Turn your cracked old rolled roof into an efficient, waterproof, and flashy new surface! Follow the instructions below to apply your Ames products to your roof. Contact us today with any questions you may have about any of our pitched rolled roof products and coatings. We’ll be happy to answer any of your questions to make sure you buy the best roof sealants and coatings to fit your unique application.
Super Primer for adhesion to EPDM Rubber Roofs
Super Elasto-Barrier Stretch Test
Products can be applied with a paint brush, a push broom, a low nap roller with a long handle or a Commercial Airless Sprayer. For larger commercial jobs. We recommend using a commercial grade airless sprayer. Graco, Bulldog or Titan brands work well. Call for specifications..
Read all label instructions before beginning. Always run a test patch first in an inconspicuous area, to ensure that proper adhesion and drying occurs and the product works to your satisfaction. Be sure surfaces are clean and dry before the coating application. All major cracks, joints and seams should be caulked with Blue Max trowel-grade liquid rubber. Do not use a silicone caulk. Large cracks may be filled with a sandable filler. Follow seam taping instructions. Mask all sensitive areas before starting.
1) Remove loose dirt, moss, and debris from the roof surface and power wash. Be sure that the surface is clean and dry before starting application of product.
*(Optional) Ames Super Primer may be needed if the surface is deteriorated or has a hard to stick surface such as aluminum or silver roof coating. Apply Super Primer at the rate of 1 gallon per 200 square feet.
(2) Prime with two to three coats of Super Elasto-Barrier until roof surface is smooth and sealed.
(Optional) Ames’ Peel & Stick Seam Tape may be needed for any splits, tears, separated seams, vents, as well as penetrations. Apply Seam Tape over dried Super Elasto-Barrier.
(3) Finish with one to two coats of Maximum-Stretch or a similar Ames product as needed to complete application. The minimum application of Super Elasto Barrier and Maximum Stretch is 2 gal/100 sq. ft. for each product.
Clean-up, Storage, and Disposal: Clean tools and small spills with water. Store unused product in its original container, tightly sealed and protected from freezing. Dispose of this product in accordance with local, state, or federal requirements