Commercial / Industrial Concrete
Brush – Use a nylon/polyester brush.
Roller – Use a 3/8″- 3/4″ nap synthetic cover.
Paint roller pan
Concrete decks and floors should be wire brushed and power-washed. In certain situations a shot-blaster may be needed to roughen the surface. Vacuum away any excess dust or debris. Read all label instructions before beginning. Always run a test patch first in an inconspicuous area to ensure that proper adhesion and drying occurs and the product works to your satisfaction.
Apply a coat of Ames® Super Primer™ (at the rate of 1 gal. / 200 sq ft.) to fill in cracks and increase adhesion to concrete. It will go on milky white and will dry clear in approximately 30 min. to an hour. It leaves a clear, slightly tacky surface that is ideal for coating. Then top coat with two coats of Ames’® Safe-T-Deck™.
Weather & Drying Guidelines:
Products are best applied between 50° to 90° F (10° to 32° C) on warm dry surfaces. Apply when the streets are dry, the sun is in the sky and no inclement weather is forecast. Starts to dry in 2-8 hours, minimum of 24 hours between coats if possible for best results, depending on thickness of application and weather; cures in 24 hours. Low temperatures, high humidity and evening and morning dew will require increased drying/curing time.
Ames® Super Primer™ standard product coverage on a smooth surface is 100 to 200 square feet per gallon per coat. Rough surfaces such as cinder block may require additional product and drying time.
Ames® Safe-T-Deck® applies at the rate of 1 gallon per 100 square feet. A minimum of two coats is recommended for a durable waterproof surface.
Clean-up, Storage, and Disposal:
Clean tools and small spills with water only – do not use any soaps or detergents. Store unused product in its original container, tightly sealed and protected from freezing. Dispose of this product in accordance with local, state, or federal requirements.
Products for Stairs
Ames® Super Primer
Painting and Sealing a Concrete Floor
Ames® Safe-T-DeckAmes Research Laboratories Safe-T-Deck. Call our experts for other roofing products and industrial coatings. 1-888 345-0809
Ames® Super PrimerCall our experts for other roofing products and industrial coatings. 1-888 345-0809
Painting and Sealing a Concrete FloorThis video demonstrates the application of Ames "Super Primer" and "Safe T Deck" onto industrial concrete floor. Ames' Concrete Floor System can be used for industrial use such as factories, offices, and more. We have not tested it on garage floors where hot tires tend to pull most products up. This system is very durable with forklift traffic daily in the video application. If scratches occur, it is an easy fix by applying more product as needed over the scratch. If you need to waterproof your garage walls we suggest checking out Ames Blue Max! You can also call us toll free at 1-888-345-0809
Waterproofing With Ames’® Super Primer™ (audio)
Weather Guidelines (audio)