These are only suggested specifications. Read all label
instructions before beginning. Always run a test patch first
in an inconspicuous area, to ensure that proper adhesion and
drying occurs and the product works to your satisfaction.
Metal Application
Metal Roofing, Mobile Homes
& RVs
(1) Remove loose dirt, flaking
rust, and debris from the roof surface: refasten any screws
or nails that may have worked loose.
(2) Prime with 1-3
coats of Elasto-Barrier or Snow Seal until roof surface
is smooth and sealed. Apply seam tape over all seams
and brush a liberal coat of coating over J-strips and
screws.
(3) Top coat with 1-2 coats
of Snow Seal, or as needed to complete application.
(1) Remove loose
dirt and gravel, moss and debris from the roof surface and power
wash.
(2) Prime
with 2-3 coats of Snow Seal or Elasto-Barrier until roof
surface is smooth and sealed. IMPORTANT: Prime roof completely
smooth and watertight before applying roofing fabric.
(3) Top coat with
1-2 coats of Snow Seal or as needed to complete application. The
minimum application is 5 gal/100 sq. ft.
(1) Remove loose
dirt, granules, moss, and debris from roof surface. IMPORTANT:
Use caution with power washing. Replace any missing pieces of
rolled roofing.
(2) Prime with
2-3 coats of Snow Seal or Elasto-Barrier until roof surface is
smooth and sealed.
(3) Top coat with
1-2 coats of Snow Seal or as needed to complete application. For
roof decks, top coat with Ames Safe-T-Deck. NOTE: Do not apply
fabric over a gravel roof.
Ames® Research Laboratories, Inc.,
PO Box 1350 Jefferson, Oregon 97352 USA
Toll-Free: 1-888-345-0809 PST, Phone: 503-588-3330 PST, Fax: 503-364-2380, Please
be sure your spam filters are set to accept emails from amesstaff@amesresearch.com.
Email: amesstaff@amesresearch.com
We Sell Factory Direct and Worldwide! Call For Free Technical Assistance and To Order:1-888-345-0809
(6 am - 6 pm PST)
