 |
AMES'® IRON COAT
SPECIFICATIONS AND SUGGESTIONS
| Read
all label instructions before beginning. Always run
a test patch first in an inconspicuous area, to ensure
that proper adhesion and drying occurs and the product
works to your satisfaction. These
are only suggested specifications. |
|
 |
| Ace Sku # |
| IC1: 1408822 |
| IC5: 1408798 |
|
Metal Roofing, Mobile Homes & RVs
(1) Remove
loose dirt, flaking rust, and debris from the roof surface:
refasten any screws or nails that may have worked loose.
(2) Prime
with 1-2 coats of Iron Coat until roof surface is smooth
and sealed. Super Elasto-Barrier may also
be used. Apply seam tape over all seams and brush a liberal
coat of Iron Coat over J-strips and screws
(3) Top coat
with 1-3 coats of Iron Coat, or as needed to complete application. |
Home | Privacy | Terms | Returns | Shipping | Got
Skype? | Shopping
Cart
Ames® Research Laboratories, Inc.,
PO Box 1350 Jefferson, Oregon 97352 USA
Toll-Free: 1-888-345-0809 PST, Phone: 503-588-3330 PST, Fax: 503-364-2380,
Please
be sure your spam filters are set to accept emails from amesstaff@amesresearch.com.
Email: amesstaff@amesresearch.com
We Sell Factory Direct and Worldwide!
Call For Free Technical Assistance and To Order:1-888-345-0809
(6 am - 6 pm PST)
Prices are in U. S. dollars and subject to change without notice. Copyright ©2002-2012 Ames® Research Laboratories, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, article content, sounds, or registered trademarks of Ames® Research Laboratories, Inc. is strictly prohibited under copyright law. Site content, including photography, descriptions, pricing, promotions, and availability are subject to change without notice. |
|
